Roku Installation - Configure Your Network

Wireless:

  1. If you use a wireless network, you can use the Roku remote and jump right into Guided Setup. When prompted, select “Wireless” as your network connection and have your network name and password ready to do the following steps
  2. Select your network from the list of available networks
  3. SSID is normally your last name
  4. Enter your network password, if you use one. Remember, network passwords are case sensitive, and use standard passwords set up by Wave if possible (0+9 digit account number)
  5. Place your player within range of your wireless network
  6. Don’t place your player in an enclosed cabinet, or it may interfere with the wireless signal
  7. Don’t place your player beneath anything, it may cause the player to overheat

Wired:

  1. If you use a wired network, this step is a snap. Simply make the two connections depicted in the diagram below, and then use your Roku remote to select “Wired” from the on-screen network options.
  2. Connect one end to the Ethernet port on the back of your Roku player
  3. Connect the other end to an open Ethernet port on your router